SolarKing TD2310 Solar Regulators

Home / Solar Regulators

Heavy duty SolarKing Solar MPPT 30AMP solar
regulator also known as solar charge controller. The
unit has a large heat sink to dissipate heat. LCD
display built in and the unit has a load timer built in for
running lighting once daylight has run out for the day.
Solar regulators are used to connect your solar panels
to batteries so the battery is charged at the correct
power rates.
MPPT is the most efficient charging method for solar
where the controller will modify the peak output power
as voltage from the solar array changes.
This unit has large terminal connections for thicker
cables.
The solar regulator suits both LiFePO4 and SLA/AGM
Batteries and has dual USB ports for charging USB
products.

  • Suits Lithium LiFePO4 Profile
  • 30 Amp Maximum Current
  • MPPT
  • 12/24VDC Auto Select
  • Adjustable Load Timer
  • Large Heat Sink
  • Charge Status Indicator
  • Under and Over Voltage Indicators
  • Load On/Off Selectable
  • LCD Display
  • Reverse Polarity Protection
  • 2 Hour Boost Charge When Under Voltage
  • Over Current Protection
  • Dual USB Charging Ports
  • Dimensions: 205 x 157 x 53 mm
  • Weight: 1.2 kg
  • Max Charge Current: 30A
  • Output Voltage: 12/24V (Auto Select)
  • Weather Rating: IP30
  • Operating Temperature Range: -20°C ~ +70°C
  • Battery Types: LiFePO4, Lithium Ion, SLA, GEL, Flooded
  • Grounding: Common Negative
  • Low Voltage Disconnect: 11.0V Default (9V to 12V adjustable)
  • Low Voltage Reconnect: 12.6V Default (11V to 13.5V adjustable)
  • Float Voltage: 13.8V Default (13V to 15V adjustable)
  • Boost Voltage: 14.4V Default (13V to 17V adjustable)
  • Charge Type: MPPT
  • Self-Consumption: <28mA
  • Terminal Connection Size: 16mm²
  • Maximum Solar Input Voltage: 100V
  • Maximum Array Power: 580W (12V), 1170W (24V)
  • 1 × TD-2310 Reg
  • 1 × Instructions
  • 1 × Screw Mounting Pack

Send us a message